This project is for the installation/hose connection of the fountain pool (in water). Individual outputs can be adjusted/turned off in power, but water may leak out through the valve to compensate for pressure. Hose dispenser for fountains with inlet and outlet sizes of 1/2 or 3/4 inch, so you can safely hold different hoses and build your own water feature. Hose distributor for pumps with flow rates up to 1500 liters per hour. This allows it to be used with many standard fountain systems. Do not use the dispenser for high-pressure pumps or flow rates above 1500 l/h. Suitable e.g. for our fountain pumps ASIN: B01GCE2OTC This dispenser is intended for use in fountain systems and is not suitable for garden irrigation or similar purposes. Note: See product description. This dispenser is intended for use in fountain systems and is not suitable for garden irrigation or similar purposes. The dispenser balances the pressure and the water can be drained via the regulator, i.e. the item is not leak-proof and must be installed in the pool.