30Pcs Metric Thread Repair Insert Kit M5 M6 M8 Helicoil Car Pro Coil Tool

¥2,449
配送料無料

30Pcs Metric Thread Repair Insert Kit M5 M6 M8 Helicoil Car Pro Coil Tool

  • ブランド: Unbranded

30Pcs Metric Thread Repair Insert Kit M5 M6 M8 Helicoil Car Pro Coil Tool

  • ブランド: Unbranded
希望小売価格: ¥3,449
価格: ¥2,449
得する金額: ¥1,000 (28%)
販売元:
¥2,449
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

30Pcs Metric Thread Repair Insert Kit M5 M6 M8 Helicoil Car Pro Coil Tool Drilling - clear the damaged threads with a standard drill. (to repair a spark plug thread no pre-drilling is necessary if using the special spark plug tap), please pay attention that for fluteless taps bigger holes are required. Checking - check that the thread and pitch of the tap and the bolt match. Tapping - use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil). Install the insert - place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Don't work against the thread direction as the tang could break. Tang removal - After finishing lift the installation tool and use the tang break tool to remove the tang. For bigger sizes and spark plug taps use long nose pliers to remove the tang. Due to the narrow and exact tolerances the new thread normally is stronger than the original ones. Features: Manufactured from precision stainless steel wire for strength, wearproof and durability. Increase connection strength and fatigue resistance due to the elasticity of wire thread inserts. The Kit Set not only includes the wire thread inserts, but the twist drill bits, wrench, thread taps, breaking pin tool which can solve your most repair needs. Great choice for restoring damaged threads in steel, iron, aluminum and anywhere which metal threads become stripped, crossed or damaged. Instructions: 1.Drill out damaged thread using correctly sized drill bit(supplied). 2.Tap re-drilled hole using tap supplied. 3.Load coiled insert into applicator. 4.Screw coil into casting. 5.Using lug breaking tool, break off tag on insert. 6.Thread is repaired and ready to use. Package Included: 25 x Thread inserts 1 x Lug breaking tool 1 x Installation tool 1 x wrench 1 x Thread tap 1 x Drill bit
  • Fruugo ID: 291738838-651428744
  • EAN: 629908791171

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

安全上の警告: Not suitable for children under 36 months

配送と返品

14日間以内に発送

  • STANDARD: 無料 - 間の配達 月 01 12月 2025–金 05 12月 2025 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る