30A IP65 On Off Inline Switch

Physical size: 11.4 × 3.5 cm (L × W), mass: 88 g. Enclosure material: PA66 reinforced nylon, compliant with EU RoHS Directive 2011/65/EU. Ingress protection: IP65 (dust-tight and protected against water jets). Electrical specifications: 30A / 220V AC rated; impulse voltage 0.5 N·m / 0.04 N·m; tensile test passed at 30 N/min; contact resistance ≤0.02 Ω; insulation resistance ≥100 MΩ; operating life 10,000 cycles; flammability UL94 V-2; dielectric strength 1500 VAC/min; withstand voltage 2500 V/5 s @ 0.025 mA. Compatible cord types: H03VVH2-F 2×0.5 mm², 2×0.75 mm², 2×4 mm², 3×2.5 mm². Connection: screw-type dual-splint terminals — insert stripped wire end flat between plates, then tighten. Includes yellow LED power indicator and tomato-red push button. Ambient operating range: -40°C to +85°C. This switch functions as both a maintenance upgrade (replacing worn or faulty original switches) and an enhancement (adding convenient on/off control to previously unswitched devices). Common applications include stage lighting, signage transformers, workshop bench tools, commercial kitchen equipment, and temporary site lighting. Its self-contained inline format requires no wall box or conduit — just integrate into the cord path during setup or repair. Traceability is ensured via a unique Manufacturing Part Number printed on the inner package label — listing part number, model number, and inspection date. This allows rapid identification during support requests and confirms adherence to documented quality control procedures before dispatch.