ATX 24Pin To 8Pin Power Cable 30cm Long Power Supply 18AWG Electrical Cord Support 1000W for DELL Optiplex 3020 7020 9020 8-pin Feature: 1. Applicable Model: The Power Cable is suitable for Dell's three commercial desktop computers Optiplex 3020 7020 9020, which require the use of 8-pin power cables and ATX 24P power cables. 2. 8-pin Power Cord: The Power Cord has 8 pins and is typically used to connect to the CPU power slot on the motherboard, providing stable power supply to the CPU. 3. ATX 24P to 8P Cable: Electrical Cord is typically used to convert a standard ATX 24-pin power cord to an 8-pin power cord to provide the additional power required for the motherboard. It should be noted that this type of cable is only suitable for use when the motherboard has an 8-pin power slot. 4. Confirm the Plug Type: When purchasing an ATX 24P to 8P Power Line, be sure to confirm that its plug type matches your power slot and motherboard slot. Different s and models may have different plug types. 5. Pay Attention to Line Length: When selecting Power Supply, please pay attention to its length. If the line is too short, it cannot reach the motherboard power slot, while if the line is too long, it can cause chaos and confusion. Therefore, please choose the appropriate length of lines to maintain cleanliness and order within the system. Specification: Origin: Mainland China Type: Cable Adapter Model Number: Power Cable Package: Yes Length: 30cm/11.8in Weight: 42G Supported models: Support for DELL full series 8P motherboard, with one end connected to a regular ATX power supply 24P, and the other end connected to a full series for DELLH61/H81/Q77/Q87/B75/A75/Q75/Q65, etc. As long as it is a motherboard 8P pinholder, it uses 18AWG standard wire, 0.18x34 copper core, and supports 1000W high-power power supply. for DELL Optiplex 3020 7020 9020 T1700 Note: Due to the above models, the motherboard is powered by 8 pins and there is also a 4 pin power supply, which is a standard CPU 4 pin design. If your power supply does not have a CPU 4-pin wire or only has an 8-pin CPU power supply, you need to purchase an additional CPU 8-pin to CPU 4-pin wire. We sell it in this store. This adapter cable requires a power supply of 24P definition, and must be AXT standard. It should be confirmed before shooting whether the chassis can be installed in the standard large power supply size. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 1 xPower Cable