Air conditioning accessory -30w self-regulating heating cable preventing 5m pipe freezing heat trace system Highlights generic brand 30w self-regulating heating cable preventing 5m pipe freezing heat trace system Description: Product name : water pipe heating cable / self-regulating heat tracing cable Voltage: 220V Power: 30W Power cord length: 5 meters and 10 meters Width: 1.5cm Surface temperature: 105 (C) Save energy electric. Easy to install and use Convenient for automatic management. Application: The self-regulating heating cable is widely used for pipe/tank freeze protection, such as water pipe, solar water heater pipe, oil pipe, downspout. For snowmelt Soil warming for plants Underfloor heating and other heating applications. Package includes: 1 Piece Self-Regulating Heating Cable Note: Installation Instruction: 1. Seal the cable end with heat shrink tubing or other electrical insulating tape. DO NOT connect the two conductors together! 2. Connect the other end with cold lead or plug (for power supply connection). 3.Wrap the heating cable around the water pipes or attach it directly to the pipes. Put the whole cable on the pipes and fix it every 30~60cm with heat tape or aluminum tape (not included). 4. Suggest to wrap a layer of rubber insulation on the pipe, improve the efficiency of the heating cable and save energy, also can protect the heating cables. 5. Connect or plug into 220~240V. The heat tracing system is complete.