Features: 1Relatively common national standard connector double ferrule straight?through connector, acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resistance. 2Suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion. 3Compression ferrule connector is composed of three parts: the connector body, the ferrule and the nut. 4When the ferrule and the nut are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to the seamless steel pipe to form an effective sealing. 5Ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble. Break the traditional installation method Item Type: Compression Ferrule Connector Material: 316 Stainless steel Scope of Application: Oil refining, chemical industry, natural gas, food manufacturing, biomedicine, instrumentation, semiconductor, accurate instrumentation, hydraulic pipeline, chemical industry, automotive industry, electronic products, accurate machinery, solar energy, petroleum exploration, ship manufacturing, etc. Formula Pressure: 0.IMPA-15MPA Applicable Temperature: 450 Connection Mode: Double ferrule connection Piping: 3~25.4 ordinary accurate seamless pipe Applicable Medium: Oil, water, and other non-corrosive or corrosive medium Thread specification(british system)Commonly namesOther namesMale thread size(approx.)Female thread size(approx.)Error(approx.) 1/8 1 point DN69.5mm / 0.4in8.8mm / 0.3in0.3mm / 0.01in 1/4 2 point DN812.5mm / 0.5in11.5mm / 0.5in0.3mm / 0.01in 3/8 3 point DN1016.2mm / 0.6in15.3mm / 0.6in0.3mm / 0.01in 1/2 4 point DN1520.3mm / 0.8in19.5mm / 0.8in0.3mm / 0.01in 1 x Compression Ferrule Connector