説明
Features
1、1. This module can convert 0-100% PWM digital signal into analog signal. 2、2. The input digital signal can be a 0-100% PWM signal of 3.3V level. 3、3. The output analog signal can be 0-5V voltage. 4、4. Widely used in signal interface switching of PLC, single chip or other industrial control board. 5、5. The power supply has reverse polarity protection function.
Specification
Features:
1. This module can convert 0-100% PWM digital signal into analog signal.
2. The input digital signal can be a 0-100% PWM signal of 3.3V level.
4. Widely used in signal interface switching of PLC, single chip or other industrial control board.
5. The power supply has reverse polarity protection function.
Specification:
1. Model: 3.3P-5V
2. PWM Signal Receive Frequency Range: 100HZ-3KHZ (1-3KHZ is recommended)
3. Insert the jump pin at 5V
After power-on, when there is no input signal, the output is 0V
6. Output Power: About 10MA
7. Mounting Method: 4 * M3 screw hole
Port:
1. DIN+: Positive of PWM signal (For common cathode, connect it to PWM signal; For common anode, connect it to 3.3V of signal terminal)
2. DIN-: Negative of PWM signal (For common cathode, connect it to GND; For common anode, connect it to PWM signal)
3. 12-30V: Positive of power supply
4. GND: Ground of power supply
5. GND: Ground of power supply. It is connected to ground of power supply
Package List:
1 * Digital-Analog PLC Module
Package List
-
Fruugo ID:
271639046-602151497
-
EAN:
9308869119941
製品安全情報
以下に概説するこの製品に固有の製品安全性情報を参照してください。
以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。
製品安全ラベル
安全上の警告:
Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.