This small professional ceramic wheel machine is specially suitable for school teaching and pottery DIY shop, to satisfy professionals and pottery enthusiasts.This machine is suitable for ceramic pottery throwing and shaping process, ceramic teaching and entertainment. Features: This wheel machine has a beautiful appearance, whose surface is processed by powder coating. It has compact structure, and will not occupy much room. Convenient to operate, good performance when preventing clay from splashing out. The wheel rotates smoothly, with low noise, and rotation direction can be switched clockwise or counterclockwise. Single-phase three-wire connection with earth leakage protection device, safe and reliable operation. Specification: Material: Metal + aluminum alloy Motor: Brushless motor Wheel Diameter: 24cm Plug Type:EU Plug Rated Voltage: 220V Power: 350W Speed: 0-300r/min Rotating Direction: Clockwise and counterclockwise Noise: <60dB Color:Orange Instructions: 1. Install four feet on the bottom of machine and adjust till it is steady. 2. Insert power plug into a socket. 3. Turn on the earth leakage protector(up is on, down is off). 4. Adjust CW/CCW rotation switch can adjust clockwise/counterclockwise direction. 5. Adjust independent speed control pedal to control wheel speed. 6. After using, the basin can be taken apart and washed, note that the water in the basin should not be too much. 7. Cleaning after use can increase the service life. Other Information: 1. 350W machine is more powerful than the 250W one and can reach a better ceramic result. 2. The basin can be taken apart and washed. 3. If the basin is loose and lathe is too low, when installing that basin, put it on the lower groove. Notice: 1. Do not press the rotary wheel by hand when machine is working. 2. When the wheel is rotating, do not instantly switch clockwise / counterclockwise rotation, wait till the wheel stops rotating. 3. Do not spatter plenty of water into the basin. Once splashing plenty of water into the basin, it should be power off and cleaned immediately. 4. Students and children should use this machine under professional guidance. 5. After use, the machine should be power off and cleaned in time. Package list: 1*Ceramic Wheel Machine 1*Installing Pedal 1*Users Manual Note: 1. As different computers display colors differently, the color of the actual item may vary slightly from the above images. 2. Please allow 1-3mm differs due to manual measurement. .