Feature:1. When the servo is continuously blocked or the angle of load blocking is greater than 3 degrees, the duration is 10 seconds and the current is maintained at 2.5A or more, it starts protection.2. Load blocking protection makes the locking force reduce half, after the load blocking is removed, the servo will return to normal when the remote control rotates at will.3. The default of the remote control is 90 degrees, the maximum is 120 degrees, support the control board 0.52.5ms, the angle is 180 degrees.4. Applicable for remote control vehicle, climbing vehicle, single chip microcomputer control robot, manipulator, etc.5. The steering gear uses stainless steel gears, which are not easy to wear, rust resistant, long service life.Specification:Item Type: 35KG Servo Material: Aluminum Alloy+PlasticColor: BlueSize: Approx. 41x37x21mm/1.6x1.5x0.8inWeight: Approx. 90.0g/3.2ozWorking Voltage: 4.8-8.4VWorking Temperature: -10 degrees Celsius to +50 degrees CelsiusStall Torque (6.0V): 25 kg.cmStall Torque (8.4V): 35 kg.cm500-2500s Angle: 270Dead Zone: 2sFitment:Fit for 1/8 RC Car Fit for 1/10 RC Car Fit for Single Chip Microcomputer Control RobotFit for Manipulator.Package List:1 x 35KG Servo 4 x Servo Arm4 x Cushion Pad5 x Screw4 x Screw Sleeve1 x Manual