360 Car four Cameras Image combiner Switch for Front/Rear/Left/Right View Parking Video Split Control Box Video support DVR Parking Monitoring Parking monitoring starting voltage must be greater than 12.5V (car batteries generally 13-14V), then the battery power, and a fifth DIP switch to dial up sign Parking REC This product has a power loss protection, voltage less than 11.5V off automatically enter the sleep state, when the voltage is restored back to normal will automatically open parking video surveillance state. Product Advantage DVD and DVR Dual Output Intelligent automatic recognition NTSL / PAL system and displays split screen Automatic intelligent trigger control / manual control Overcurrent and overload protection electronic fuse, automatic recovery 9-36 V wide voltage which can provide a stable 12 volts to cameras Automatically start-up , shut-off and switches dvd screen Compact housing, low power consumption, designed intelligent energy-saving less than 2 watt for driving inhabits. Important Info 1. Supports all N or P system camera signal inputpower on the product will automatically recognize the camera system standard. 2. Front/Rear/Left/Right four directions around, 360 degree panoramic monitor display, complete eliminate the car visual dead in front and back. 4. Using the most advanced split-screen technology, easily switch monitor position, arbitrary control of the vehicle to avoid the obstacle 5. Suitable for the current urban parking environment, easy to rub when parking in narrow spaces narrow spaces. 5. It is more easier when parking in complex environment, the driver can be visually detected in the surrounding to avoid collision when parking. Specification Video inputs 4-CH inputs Video system PAL/NTSC(automatic identification system, attention, connect the camera before power on, The equipment support hybrid system) Video parameters Resolution 720576, 25FPS, Vp-p:1.0V, impedance: 75 Video Interface 4 inputs (RCA connector), 2 outputs (RCA connector) Control mode trigger control:High Trigger/Remote control/ One key control Auto display mode Auto display Various Modes Mirror OFF/ON Operating temperature -10 to +65 Power Consumption hosts running: 2W; power-saving mode: 1W Output Power 12V / 0.8A (camera power supply) Rated voltage DC 12V/24V N.W. 150g Size 91*53*23mm (L * W * H) Function (1) Power Led, Power, the lights lit, when the voltage is lower than 9v, the power light flashes; when the system enters standby mode, the power light flashes. This product is the normal input voltage of 12 / 24V. (2) trigger line and manual keys can select the image in any way 4-way camera (3In Trigger state, hand the keys effectively. When you press the manual key "Quad" of or H button, the trigger is invalid, Undo "QUAD" trigger to be effective (4 After triggering undo, image delay three seconds, and enters the standby state. (5) the trigger condition, no priority, when the trigger line when more than two trigger, then the trigger line corresponding channel full-screen image, only three seconds, and then jumps automatically split image screen. (6) can connect up to four cameras, and automatically split video screen (7) car camera powered by the device for easy wiring (8) DVD display device triggered by a switch, wiring and display convenience (9) Each image can be set to forward / mirroring respectively, RCA connectors can be configured to connect DVR / VCD Package includes: 1Video Cables 31cm6pcs 2Display Video Cable1M 3Remote Control 4Micro SD Card Reader 69V-36V Power Votage 7Video control box 8Camera Trigger LINE 10User Manul 11Guarantee Card