1The leakproof sealing tape can be bent at 90 to provide long-lasting tightness. 2Suitable for sinks, kitchen gas stove, bathtubs, bottom edges of wall and gaps to keep kitchens and bathrooms clean. 3Adopting self-adhesive design, strong adhesion, strong and stable, not easy to fall off. 4Made of high-quality PE and butyl rubber materials, durable and resistant to wear and corrosion. 5The surface is smooth and beautiful, waterproof, anti-fouling, anti-mildew, anti-moisture, easy to clean.Condition: 100% Brand New Item Type: Wall Sealing Tape Material: PE + Butyl Rubber Color: White Weight: Approx. 223g / 7.9oz Product Size: Width: Approx. 38mm / 1.5in Length: Approx. 3.35m / 11ft Installation: 1. Clean the parts to be sealed first and keep them dry. 2. Before use, first measure the length dimension of the required sealing part accurately. 3. Take out the product, measure the same length of the waterproof strip and the sealed part again and cut it. 4. First peel off the 5CM length of the adhesive tape on the back of the product and fold it to 90 , and then fix the waterproof strip to the surface part to be pasted; continue to peel the adhesive tape until all the installation is completed. 5. When the product is pasted at a 90 turn, cut each side of the butt joint into a 45 mating interface. 6. The temperature range of the installation room is preferably around 25 . If the temperature is too low, use an electric hair dryer to heat the adhesive and paste it. 7. After the product is pasted, it is pressed firmly to make it stick more firmly. 8. After the product is pasted, do not mix with water within 24 hours and keep it dry.1 x Wall Sealing Tape1.Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.