Airticht and Moisture- Real-time Monitoring Fully parent desicn. Store the consumables in a dry place to prevent printing problems such as drawing, plugging, and caused by moisture in the consumables. The maximum thickness of the compatible material tray is 79mm, and the maximum diameter of the compatible material tray is 210mm. How to use: 1. Put the desiccant, thermometer, and material shaft into the bottom. 2. Load the consumables 3. Pass the guide tube through the outlet hole 4. Pass the wire through the guide tube and cover the lid Note: The product does not include desiccant, which needs to be prepared by yourself. The electronic thermometer does not include batteries, and the battery model is LR44.Supplies in the picture are not included Colour: parent Material:PP+ABS Package Contents: 1 x Drying box 1 x Electronic thermohygrometer(without battery) 1 x Guide Tube 2 x Feed Shaft 4 x Bearing 1 set x Spare Rubber Plug Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.