3D Printer CNC V3 Engraver Expansion Board 3pcs A4988 Driver Module

¥2,349
配送料無料

3D Printer CNC V3 Engraver Expansion Board 3pcs A4988 Driver Module

  • ブランド: Unbranded

3D Printer CNC V3 Engraver Expansion Board 3pcs A4988 Driver Module

  • ブランド: Unbranded
希望小売価格: ¥3,049
価格: ¥2,349
得する金額: ¥700 (22%)
販売元:
¥2,349
配送料無料

在庫あり

以下の支払い方法を利用することができます

説明

Features: The expansion board can be used as engraving machine, 3D printer and other drive expansion board. Compatible with GRBL 0.8. Open source firmware running on for that converts G code commands into stepped signals. PWM spindle and direction pins, support 4-axis (X, Y, Z, A - you can copy X, Y, Z or use the pin of D12 and D13 to custom firmware to perform the complete axis 4). Compact structure, stepper motors can be connected to 4 pin connectors or soldered. This is a set of disassembled parts and you need basic soldering techniques to solder them together. Specification: Radiator Size: Approx 8*8mm CNC Expansion Board: Version: V3.0 Voltage: DC 12V-36V (only DRV8825 driver can handle voltages up to 36V, so please consider the power supply voltage) Board Size: Approx. 68 x 53mm / 2.7 x 2.1in A4988 Driver Module: Thermal Shutdown Circuit: Yes Crossover Current Protection: Yes Ground Fault Protection: Yes Short Circuit Protection: Yes Compatible Logic Voltage: 3.3V, 5V Five Modes: full, 1/2, 1/4, 1/8 and 1/16 Size: Approx. 20 x 15mm / 0.8 x 0.6in Mix use the slow current decay model. Internal UVLO and low RDS (on) output. Current decay mode automatically detected/selected. Three-phase rectification, low power consumption. Package List: 1 x CNC V3 Expansion Board 3 x A4988 Driver Module 3 x Radiator .
  • Fruugo ID: 392303446-839353532
  • EAN: 7590917157360

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Warning: Please read the product instructions carefully before use to ensure correct use.
シリアルナンバー: 7590917157360

配送と返品

2日間以内に発送

  • STANDARD: 無料 - 間の配達 月 20 10月 2025–月 27 10月 2025 - 無料

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • Wuhan Jinxingkai Network Technology Co., Ltd.
  • Wuhan Jinxingkai Network Technology Co., Ltd.
  • No. 1-1, Door 57
  • Shihua Village
  • Qingshan District
  • Wuhan
  • CN
  • 430000
  • goldxinks@163.com
  • 0086 17786498762
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795