4 to 20ma Stainless Steel Pressure Sensor 1/8in 27NPT Thread Pressure Sender Transducer for Water Oil Gas 0 to 10Mpa Item Type: Stainless Steel Pressure Sensor Material: Stainless Steel Rated Pressure Range: 0 to 10Mpa Overload Pressure: 1.5 times of rated pressure Breaking Pressure: 3 times of rated pressure Response Time: Less than 2ms Operating Temperature: - 40℃ to 125 ℃ Output Signal: 4 to 20ma Accuracy: Within 2% of reading (full scale) Thread: 1/8 inch 27NPT thread Media Compatibility: Refrigerant, clean and non corrosive oil, gas and water, etc. Wiring Connector: Water sealing quick disconnect. Including mating connector (standard for Packard Metri pack connector) and harness (pigtail). Wiring: Red +5V. Black is the ground. (sometimes green) Blue is used for signal output