Condition: 100% Brand New_x000D_ Item Type: Wind Speed Sensor_x000D_ Material: Polycarbonate_x000D_ Parameter: _x000D_ DC Power Supply (Default)10-30V DC_x000D_ Maximum Power ConsumptionCurrent Output1.2W_x000D_ Transmitter Circuit Operating Temperature-20 to +60, 0%RH-80%RH_x000D_ Measuring Range8 Directions_x000D_ Dynamic Response Time0.5s_x000D_ Output SignalCurrent Output4-20mA_x000D_ Load CapacityCurrent Output600_x000D_ _x000D_ Calculation Method: _x000D_ 0-10V Output Comparison Table_x000D_ Output Value (V)Corresponding Wind Direction_x000D_ 0North Wind_x000D_ 1.4286Northeast Wind_x000D_ 2.8571East Wind_x000D_ 4.2857Southeast Wind_x000D_ 5.7143South Wind_x000D_ 7.1429Southwest Wind_x000D_ 8.5714West Wind_x000D_ 10Northwest Wind_x000D_ _x000D_ Power Wiring: Wide Voltage 10-30V DC Power Input_x000D_ Product Size: Approx. 23.5 x 18.5 cm / 9.3 x 7.3 in_x000D_ Weight: Approx. 317g / 11.2oz_x000D_ _x000D_ Common Problems and Solutions:_x000D_ No output or output error possible causes:_x000D_ 1) The range corresponding error causes the error PLC calculation. Please refer to the technical indicators for the range._x000D_ 2) The wiring method is incorrect or the wiring sequence is wrong._x000D_ 3) The power supply voltage is incorrect (24V power supply for 0-10V type)._x000D_ 4) The distance between the transmitter and the collector is too long, causing signal disturbance._x000D_ 5) The PLC collection port is damaged._x000D_ 6) Equipment damage. 1Polycarbonate shell, high mechanical strength, high hardness, corrosion resistance, no rust can be used outdoors for a long time. 28 indication directions, high-performance bearings, small rotational resistance, accurate measurement, more convenient and practical. 3Small and light in size, easy to carry and assemble, anti-electromagnetic interference treatment, can be applied to both four-wire and three-wire connection. 4Anti-exposure, high impact strength, and with the internal smooth bearing system to guarantee the accuracy of information collection. 5Widely used in the measurement of wind direction in greenhouses, environmental protection, weather stations, ships, terminals, breeding and other environments.1 x Wind Speed Sensor1 x Cable1 x Screw Kit (4 x Screw, 4 x Nut)1. The user should not disassemble it by himself, and should not touch the sensor core to avoid damage to the product._x000D_ 2. Keep away from high-power interference equipment as much as possible to avoid inaccurate measurement, such as inverters, motors, etc. When installing or disassembling the transmitter, the power must be disconnected first, and water in the transmitter can cause irreversible changes._x000D_ 3. Prevent chemical reagents, oil, dust, etc. from directly invading the sensor, do not use it for a long time under condensation and extreme temperature environment, and prevent cold and thermal shock.