Description Name: Remote Control WISNIOWSKI Origin: Mainland China Certification: CE Model Number: Remote Control WISNIOWSKI For: WISNIOWSKI Garage Door Remote Control Frequency: 433.92MHz Chip: Rolling Code Usage: Program on receiver Voltage: 12V Material: Metal and PVC Distance: 10-50m open space Size: 70*33*12mm Including: Remote Control, Key Chain, English Manual, Battery Compatible with WISNIOWSKI 433.92MHz Rolling Code Remote Control 1. Type of programming: Programming with the receiver 2. Number of channels: 4 3. Code: Rolling code 4. Frequency: 433.92MHz 5. Working Range: 10-50m (open space) 6. Power supply: 12V 27A 7. Remote comes with battery Security of use: Dynamic code provides a high level of security, non-copyable code Disclaimer: Your old remote must match the product shown. The new remote is not compatible with other remotes. WISNIOWSKI Remote Programming: Program to gate or garage door openers the same way as WISNIOWSKI remotes. Please refer to your receiver's user manual. Materials required for programming: your receiver 1. Open your receiver from the garage door. 2. Press the programming button. Label is usually: ENR, MEMO, or PROG. 3. On some receivers, it is necessary to hold down the programming button. 4. On the receiver, the LED indicates the start of programming mode. 5. Press and release a button on the new remote control for one second. 6. The LED on the receiver will change or turn off to indicate successful programming. 7. Wait a few seconds to exit programming mode. 8. Congratulations, your new remote control is programmed. Package Includes: Remote Control Battery Keychain English Manual