1、The product switch is turned OFF and the product has no function. 2、The product switch goes to mode When the product has sunlight shining into the solar panel during the day, the LED will not light. When the solar panel is not illuminated by the sun at night, the LED is fully lit (light mode). 3、When the product switch is in mode 2, the product will not be illuminated to the solar panel at night. If the PIR sensor senses the movement of the human body, the LED will be turned on to the highlight mode. If the human body moves within 20 seconds, th 4、When the product switch is turned to mode 3, the product will not be illuminated to the solar panel at night. If the PIR sensor senses the human body movement, the LED turns on the highlight mode. If the human body moves within 20 seconds, then This prod 5、During the daytime, when the product solar panel is illuminated, the product LED is extinguished. Features: 1. The product switch is turned OFF and the product has no function. 2. The product switch goes to mode 1. When the product has sunlight shining into the solar panel during the day, the LED will not light. When the solar panel is not illuminated by the sun at night, the LED is fully lit (light mode). 3. When the product switch is in mode 2, the product will not be illuminated to the solar panel at night. If the PIR sensor senses the movement of the human body, the LED will be turned on to the highlight mode. If the human body moves within 20 seconds, then This product will always be highlighted. If the human body leaves or the human body is still, the product will change from the high-light mode to the power-saving mode after 20 seconds (there are 18 LED lights), in the power-saving mode, such as PIR sensing the human body movement. When the product is switched from the power saving mode to the highlight mode. This loops through this function. During the day, when the product solar panel is illuminated, the product LED is extinguished. 4. When the product switch is turned to mode 3, the product will not be illuminated to the solar panel at night. If the PIR sensor senses the human body movement, the LED turns on the highlight mode. If the human body moves within 20 seconds, then This product will always be highlighted. If the body is removed or the body is still, the product will turn off after 20 seconds. After the LED is turned off, if the PIR senses the movement of the human body, the product will turn on the highlight mode. This loops through this function. 5. During the daytime, when the product solar panel is illuminated, the product LED is extinguished. Specifications: Material: ABS Solar panel: PET matte lamination made of monocrystalline silicon LED: 48 LEDs Color temperature: white light (6000-7000K) Induction angle: 120 degrees Battery: 1* 3.7V 1800mAh rechargeable battery Working time: charging 8-10 hours during the day, power saving mode 32H, highlight mode 2.6H. Installation method: wall hanging Waterproof rating: ip65 Sensitive motion sensor detection distance: 9~12 meters Switch: pin switch Package List: 1 * Wall Lamp 2 * Screw 2 * Expansion bolt set 1 * User manual