4mins Customizable Voice Recording Module for Greeting Cards with Light Sensor (Single Play)

Features: 1. Customizable recording for up to 4 minutes—ideal for music, voice messages, or other audio content. 2. Light-sensitive trigger button activates playback automatically. 3. Powered by three button-cell batteries; includes a 16Ω 0.25W speaker with clear, audible sound output. 4. Pre-assembled with microphone, push-button switches, speaker, and battery holder—ready to use upon arrival. 5. Perfect for greeting cards, gift boxes, jewelry boxes, crafts, and educational toys. Specifications: - Recording time: Up to 4 minutes - Operating voltage: 3.0V–4.5V (3 x button-cell batteries included) - Recordings can be overwritten—each new recording replaces the previous one - Board dimensions (L × W × H): 46 × 27 × 10 mm (1.8 × 1.1 × 0.4 in) - Speaker diameter: Approx. 40 mm (1.6 in) - Speaker thickness: Approx. 5 mm (0.2 in) - Button cable length: Approx. 5 cm (2 in) - Playback modes: Single play or continuous loop Package Includes: - 1 × Greeting Card Sound Module Recording & Playback Instructions: 1. Press the record button until you hear a “beep,” then release. Speak clearly within 5–10 cm of the microphone to begin recording. 2. Press the record button again and release when you hear a confirmation tone—the recording is now saved. 3. Press the play button to replay the recorded message. Press the play button again during playback to stop. Note: - The red-wire button is for recording. - The black-wire button is for playback.