Installation Steps: Step 1: Keep the installation surface absolutely clean and dry and remove water or oil stains. Step 2: Adjust the best installation position. It is recommended to use a baking gun or a hair dryer to heat the adhesive. Step 3: Tear off the film and paste it. Avoid finger contact with the rubber surface during operation. After the product is pasted press hard to ensure the full contact of the rubber surface. Installation Precautions: Please choose sunny day installation be sure to thoroughly clean the paste position with detergent before installation and press firmly for a period of time. Do not use brute force during installation. When there is a position deviation it can be adjusted in time. Please stay away from water for 2 days after installation. It is recommended not to wash the car within a week. Specification: Material: ABS Function: Protect the car paint Fit for: Peugeot 2008 2014-2018 Installation method: Double-sided tape paste Effect: Adds luster to the original vehicle Color: Silver Package Included: 2 x Fog Light Covers (L\u0026R) Note: Please allow 1-3cm differences due to manual measurement. Due to the difference between different monitorsthe picture may not reflect the actual color of the item.Thank you Packing Safely in Retail Box.