4PCS 4 Button Wireless Garage Remote Control, 433 MHz Universal Gate Duplicator

Wide Compatibility: This universal remote control supports multiple codes, including compatible with 2260 all manufacturers, compatible with 2262 all manufacturers, compatible with PT2264, compatible with 5326 all manufacturers, compatible with 527 all manufacturers, compatible with 1527 all manufacturers, compatible with 2240 all manufacturers, compatible with SC5262, compatible with HT600, compatible with HT680, compatible with HT6207, compatible with HT6010, compatible with HT6012, compatible with HT6014, compatible with SMC918 series. Despite the different manufacturer's chip model prefix, it ensures versatile applications.Erase and copy code: Press the top two buttons simultaneously until the LED flashes to clear the data. When pairing, hold the original remote control in one hand and the duplicate door remote control in the other hand. Bring the two remote controls as close as possible, it is better to place the two remote controls side by side on the table at zero distance, respectively press the buttons needed for copying, and the LED indicator flashes three times quickly and then flashes quickly, indicating successful pairing.Multifunction: Check the IC code of your original door remote control to ensure compatibility. This 4-in-1 fixed frequency replicator operates at 433 MHz. Can be used to control electric doors, garage doors, telescopic doors, sliding doors, barriers and roller shutter doors. Check frequency calibration before purchasing to avoid compatibility issues.10m Range: This garage door remote control with a wireless RF frequency of 433 MHz provides a reliable, interference-free signal that can penetrate walls, doors and floors up to 10 meters for remote access.The sliding guard prevents accidental activation. The compact design fits well in key rings, wallets and backpacks, providing security.Product size: 5.8*3*1.2cmHow to use:1. Code cleaning method:Press the unlock button and lock button at the same time, some cases are up button and down button, after the LED indicator flashes three times, loosen the one of the buttons while the other remains pressed, then press the released button three times, the LED indicator will enter rapid flashing state. At this time, all data in the memory is erased, the cleaned remote control will not have a lighting LED indicator no matter which button you press.2. Copy methodOne hand keeps the original remote control, while another hand keeps the copy remote control, both remote controls should be placed as close as possible, the ideal situation is to put both remote controls on the desktop side by side with zero distance, respectively press the copy button, when the LED light flashes quickly after three flashes, this copy is successful, other key operation methods are the same. Some remote controls have smaller transmission power, so the original remote control must be put close to the copy remote control to use. If noise is present, avoid interference to operate. If copying fails, copy again after clearing the code.