Description How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system. Features - Color: Black.- Size: 11.5 x 3 x 1.7 cm/4.5 x 1.2 x 0.7 inch.- Material: Steel, plastic.- Specifications: 25A 600VAC.- Withstand voltage: AC2500V / 1Min.- Use warp: 22-10AWG (4.0mm2).- Maximum torque: 9KG.CM.- Product spacing: 12mm (distance between two screws).- Temperature range: -30-120.- Product pole number: 8P.- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.- Terminal strips are easy to install and hold in place by two screw holes at either end of the terminal.- Each pair of barrier terminal block is insulated from the next, prevent circuit in disorder.- The furcate pre-insulated terminal is easy to connect with electrical wire to strengthen its reliability and safety.Packing list: 5 x 8P 25A Barrier Terminal Blocks5 x 8P Red Terminal Stripes5 x 8P Black Terminal Stripes