Precaution: The direction must be clear when inserting the cable, and do not insert or unplug or insert offset to prevent to the device. When inserting or unplugging the device, first plug in the socket and then insert the cable to avoid cutting the pins with excessive force.Wiring: The 24PIN main supply is inserted into the 24PIN female connector on the other side of the motherboard, and the auxiliary detection SATA cord is inserted into the adapter card to achieve the same supply protection and graphics life as the main switch.Since the current high- supply is relatively expensive, the use of this line can simultaneously use the low- switch of the two supplies at the same time, thereby increasing the supply.Through this card, the two supplies can be switched on and off at the same time. The of the graphics card is allocated to two sources, which means the use of high- .Name: supply startup boardModel: ATX2ATX-N03Interface: ATX24PINNet weight: 15gColour: as shownMaterial: PCBSize: 6.9x3x1.5cmPackage Contents:5 * Supply BoardOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.