5000mah Portable Cell Spot Welder Nickel Sheets

¥7,490
+ 配送料¥1,099

5000mah Portable Cell Spot Welder Nickel Sheets

  • ブランド: Unbranded

5000mah Portable Cell Spot Welder Nickel Sheets

  • ブランド: Unbranded
希望小売価格: ¥26,090
価格: ¥7,490
得する金額: ¥18,600 (71%)
販売元:
¥7,490
+ 配送料¥1,099

在庫あり

以下の支払い方法を利用することができます

説明

Material: mainly made of plastic, durable. The copper welding pen comes with 10AWG silicone wire and protective cover for safe use. Battery: Equipped with rechargeable battery and charging indicator, when fully charged, you can weld thousands of points on a 0,1-0,15mm nickel sheet with low power consumption. Function: Self-detection, the welding pen is automatically started when you touch the nickel sheet, and the response time is 0,8s. Good build quality, stable performance and long service life. Adjustable 6 levels: The output power can be adjusted at 6 levels, in cycles 1-6-1, and welding is more accurate. Dimensions (L. x W x H ): 5,51 x 3,15 x 1,57 inches; Package includes: 1 piece spot welding machine with 2 welding pins; 2 pieces x welding pin sleeve; 1 piece x nickel sheet; 1 piece x USB do charging cable. Specifications: Product Type: Spot Welding Machine Material: plastic, circuit board, copper Color: Black Size (L. x W x H ): approximately 140 x 80 x 40 mm / 5,51 x 3,15 x 1,57 inches Power supply: 3,7 V, 5000 mAh battery (built-in) Transmission: 1-6 gears Welding thickness: 0,1-0,15 mm Charging Input Connector: Micro USB Charging time: ok. 4 hours 1 sztuka x spot welding machine with 2 welding pins 2 x Welding Pin Sleeves 1 x Nickel foil 1 x USB do charging cable Description of the test step First press and hold the power button for 3 seconds, then turn on the device after hearing the buzzer, there are 6 gears in total. After turning on the device, press the button briefly, and when the buzzer sound sounds, change the gear to a higher one. The indicator light flashes, indicating the level of gear, and the number of flashes indicates the level of gear. For accurate counting, wait for the next flash break when you press the button to start counting. If the above tests were successful, press the soldering iron do of the object that ma to be soldered and you will hear a beep - the soldering iron has come into contact with the object and wait about 1 second for soldering; if the beep does not sound, press the soldering iron again It is recommended to line the working table with stainless steel/iron objects during the test so that spot welds can be made. Comments 1, User's product after receipt, usually the battery is not fully charged, it must first be charged before use for best results. The recommended first charge time is more than 12 hours. 2. This machine can weld 0,1-0,15mm nickel steel components, 0,1 pure nickel components. It cannot weld pure copper and other materials with good electrical conductivity. 3, Do not use for a long time, the battery level should not be too low or too high. 4, If the power is too low, it will cause the microcontroller to not work, which will cause the machine to not be able to be turned on, the charging light will not light up, in which case it should be charged, charging for a few minutes will be restored. 5. It is recommended to lay out the working table with stainless steel/iron objects during the test so that spot welding can be performed. Suggestions for maintenance 1. The battery must be fully charged before first use 2. If the battery level is low, the operation of the device may be disrupted. 3. If you don’t use your device for a long time, charge it at least once a month to extend battery life.
  • ブランド: Unbranded
  • カテゴリー: 溶接機
  • Fruugo ID: 365777718-792549545
  • EAN: 4016278450214

製品安全情報

以下に概説するこの製品に固有の製品安全性情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製品安全ラベル

CE Mark
安全上の警告: Not suitable for children under 36 months
材料: Plastic 5%

配送と返品

24時間以内に発送

  • STANDARD: ¥1,099 - 間の配達 金 31 10月 2025–月 10 11月 2025

中国より発送。

ご注文の商品は、お客様の仕様に従い、万全の状態で配送されるように最善を尽くしています。しかし、もし注文に抜けがあったり、注文したものと違う商品が届いたり、注文に満足できないその他の理由がある場合は、注文全体やその中のいずれかの商品を返品し、その全額の返金を受けることができます。 全額返金ポリシーを見る

製品コンプライアンスの詳細

以下に概説されているこの製品に固有のコンプライアンス情報を参照してください。

以下の情報は、この製品を販売する独立したサードパーティ小売業者によって提供されています。

製造業者:
次の情報は、Fruugoで販売される関連製品の製造業者の連絡先詳細です。

  • YJL Official Store 02
  • Quanzhou Yijiele Technology Co., Ltd
  • Room 3110, Building 2, Vanke Jinyu Binjiang Phase 2
  • 1118, Quanan North Road
  • Jinjiang City
  • CN
  • 362212
  • mikoautoparts@outlook.com
  • 8615980665206

EUにおける責任者:
次の情報は、EUにおける責任者の連絡先情報の概要です。ここで言う責任者とはEUに拠点を置く指定経済事業者で、EU域内で販売される関連製品に関するコンプライアンス義務を負う者のことです。

  • E-CrossStu GmbH
  • E-CrossStu GmbH
  • Mainzer Landstr.69
  • 60329 Frankfurt am Main
  • Hessen
  • DE
  • 60329
  • E-CrossStu@web.de
  • 69332967674