Features:1. This pocket kitchen electronic scale is a portable high precision digital scale.It is with 0.1g accuracy.2. Tare weight function.3. Calibration function. You can calibrate the scale just with a weight.4. Pieces counting function.5. Complete weighing modes. 6 units G ,OZ , OZT , DWT , GN , CT for free shifting.Description:Type: 3000g/0.1g; 500g/0.01gAccuracy: 0.1g 0.01gButtons: On/off; Mode; Tare; PcsLCD display: 5-digit LCD display6 units can be selected, G, OZ, OZT, DWT, GN, CTScale body size: 180mm* 117mm* 20mmWeighing platform size: 100mm* 100mmWeighing pan size: 190mm * 145mm * 25mmScreen size: 42mm* 20mmWeight: 0.36kgOperation method:1. Place the product on a level surface. Short pressON/OFor switch on.2. The display shows "0.00" or "0.0", useMorModelkey to realize unit conversion.3. After switching to the unit to be used, weigh the items on the weighing pan.Cleared:1. Place a tray or container on the weighing pan.2. Press [T] or [TARE] key, the display will show "0.00" or "0.0".3. Then you can add items to the container or tray for weighing.Counting function:The prerequisite for the counting function: the weight of each item to be counted must be the same.1. Turn on as described above.2. Long press the [PCS] key, the display shows the sampling value 25, and then you can press the [M/Model] key to switch to other sampling values 60, 75, 100, and then put the same amount of samples according to the displayed value.3. Press [PCS] key to complete sampling, and then press [PCS] key to start counting.4. Put the items to be counted on the weighing pan, and the display will show the specific quantity of the items.Calibration:This product has been calibrated before leaving the factory. If the product cannot be weighed normally, please re-calibrate.Troubleshooting:The main reasons for inaccurate weighing and malfunction are: low battery power, incorrect calibration, weighing items exceeding the maximum range of the product, or not operating on a flat surface, etc.[DISPLAY] means to remove the error [OUT2] need to re-calibrate [EEEE] Overweight, the overweight items should be removed immediately.Example: [3kg/0.1g] represents the maximum weight of 3000 grams, the accuracy is 0.1 grams, the starting weight is 0.5 grams, and the error is within plus or minus 0.3 grams;500g/0.01grepresents the maximum load of 500 grams, the accuracy is 0.01 grams, the starting weight is 0.05 grams, and the error is within plus or minus 0.03 grams.includes:1 x Electronic Scale