Feature: 1. Good‑quality hot press uses a 29 x 38cm heating plate and a non‑stick and stable PTFE coated plate. 5‑in‑1 heat press is suitable for hats, T‑shirts, mugs and plates, which is labor‑saving 2. Adopt latest double-tube heating, the temperature is even, the difference between the center temperature and the side temperature is only 5℃, and the transfer effect is better. But the old heating tube temperature exceeds 10℃ 3. The rotating shaft is made of aluminum alloy and does not rust. Upper shell is made of plastic material, and the inside is equipped with thermal insulation cotton. The temperature is not hot, unlike other old iron sheets 4. The controller buttons are made of silica gel, which is convenient and simple. Long press "+" and "-" to quickly add or subtract numbers. Unlike the old face stickers without feeling when pressed, and prone to problems 5. The combined heat press is equipped with a PTFE coated press plate(29x38cm), a set of ironing pads(8x14cm, curved), and a mug press(diameter 7.5x13cm, 11oz), sponge pad for plate(12.5cm and 16cm) 6. This 5‑in‑1 heat press has a digital LCD display‑time and temperature control, and can intelligently sound an audible alarm after the transfer is completed Specification: Item Type: 5-in-1 Transfer Machine Temperature Range: 40-210℃ (104-410℉) Time Control: 1-999s Highest Resolution: 300 (dpi) Print Size: A4, A5, A6 (sublimation paper) Color Grade: 256 (level) Transfer Area: Approx. 29 x 38cm / 11.4 x 15in Power Cord Length: Approx. 1.5meter / 4.9ft PTFE Coated Press Plate Size: Approx. 29 x 38cm / 11.4 x 15in Ironing Pads Size: Approx. 8 x 14cm / 3.1 x 5.5in Mug Press Machine Size: Approx. 7.5 x 13cm / 3 x 5.1in Sponge Pad for Plate Size: Approx. 12.5 x 16cm / 4.9 x 6.3in Total Size(LxW)): Approx. 39 x 30cm / 15.4 x 11.8in. Package List: 1 x Heat Press Machine Host1 x Baking Cup Machine1 x Sponge Pad for Plate1 Set of Ironing Pad(2 accessories in total)1 x Power Adapter1 x User Manual Note: Pull out the plug when moving the machine, place on a safe and stable platform, and operate under ventilated conditions. Wear space protection equipment when operating the machine, and do not touch the heater to avoid damage to the machine.