Specification: Output voltage: DC12V. Power: 7.8W. Output current: 2A each color. Light color: RGB. LED type: 3528. LED quantity: 300pcs. Output:Three CMOS drain-open output. Connecting mode:Common anode. Remote distance: within 8M. Working temperature: - 20℃~+50℃. Beam angle: 120°. Length: 5M. Width: 8mm. Feature: Remote control: Control the LED strip lights with remote control and controller. you can select all colors.Also you can DIY your favorite colors by mixing several colors together and saving them for later use. Easy to install and cut: The multi-color changing led strip lights can be cut every 3LEDs along the cutting mark.No damage to remaining LED strips.Due to the flexible material and self-stick back LED tape strips can be easily placed on any clean, dry and flat surface with good adhesion such as paint, glass, plastic, metal, glass.You just need to remove the red tape on the back of the tape strip and install it directly. Waterproof: LED waterproof strip lights, working voltage 12V, low heat, touchable. Wide application: decorate any place and have fun with strip lights 5050 RGB SMD 300LEDs with dimming and brightness controls, suitable for indoor lighting and decor.LED strips are treated with IP65, high quality, waterproof.But please note: only LED strips are waterproof.  Remote controller, power adaptor and connectors are non-waterproof.The music rope light have a memory function, when you turn on it,it will be the same as last usage.It can decorate your bedroom, ceiling, stairs, kitchen cabinets, porch, desk and living room, especially suitable for Christmas, Halloween, party and other holidays. Note: ① Connect the light strip to DC12V voltage for use. ②Connect the light strip correctly in strict accordance with the installation method. ③ Do not put the light strip on the reel for a long time because they need heat dissipation. ④ Clean the surface before pasting the light bar (such as walls, mirrors, etc). Please do not paste the light to the conductive metal surface as this may lead to short circuit of the light bar. ⑤ Children under 16 years old need to use this product under the guidance of adults. Paste usage precaution: 1.Glass (Not suitable for long-term paste, easy to fall off.). 2. Textile furniture (Not suitable for long-term paste, easy to fall off.). 3. Painted wall (Suitable for pasting, but it can easily cause the damage of wall when tearing.). 4. Artificial leather furniture (Non-leather) (Suitable for pasting, but it is easily causes the damage of furniture when tearing.). 5. Resin ceilings and aluminium buckle ceilings can be used perfectly and safely. 6. Some special materials can also cause slurry to fall. Note: This kind of double-sided tap is suitable for indoor walls, tables, shelves, televisions, computers, etc. The surface of the object should be dust-free, paint-free and smooth. This kind of double-sided tap is disposable and cannot be reused. First, clean the surface of the object and keep it clean and dry. Then take off the red film of the light bar and press the light bar on the object with your hand to make the light bar paste tightly to the object. Package included: 1x 5M LED strip light. 1x Remote control(without battery). 1x RGB control box. 1x Cable