Description This simple board breaks out a female USB type 's VCC, GND, D- and D+ (4 pins) to a 0.1inch pitch header. If you want to add a USB to your project, but don't want to put up with soldering tiny connectors, this is the board for you. Features - Color: Red. - Material: Plastic, metal. - Size: Approx. 25 x 20mm(L*W). - 2.54mm Header. - This adapter allows you to quickly and easily mount a USB Type A Female connector onto a breadboard or prototype board. - It brings all 4 (included shield ground) of its USB Type A Female socket out to prototyping work. - Just insert your phone cable on this board, then you can use the VCC, GND on the pin, and obtain 5V power supply. - Also good for an un-regulated, non-limited 5V supply up to 100mA. Color: Red. Material: Plastic. Size: Approx. 25 x 20mm(L*W). 2.54mm Header. This adapter allows you to quickly and easily mount a USB Type A Female connector onto a breadboard or prototype board. It brings all 4 (included shield ground) of its USB Type A Female socket out to prototyping work. Just insert your phone cable on this board, then you can use the VCC, GND on the pin, and obtain 5V power supply.