Outer diameter: Around 90 cmWeight: Around 900gSpecifications: Removable in 6 sectionsMaterial: Stainless Steel + High Elastic Thickened Foam, very resistant to crackingInstallation steps of steel pipe hoopThe first section installation method:. Laminate the two nozzles up and down.. One section is fixed, turn the other section and slightly push to the middle.. Keep rotating, when the bayonet of section 2 is fully aligned, the tube will automatically be inserted into the part.. Press the convex point of the tube and continue to insert it, and the 2 sections are closed with a click.. Pull the next 2 pipes to check whether the installation is firm, and continue to install the next section according to this method.Installation method in the last section:Put the sports hoops upright on the ground, with the unmerged 2 sections at the top, grasp the 2 sections and press them down gently. When the nozzles of the 2 sections are aligned, you can insert it.