Features: 1.6 Port PoE Switch: The 6 Port PoE Switch has 4 Fast Ethernet PoE ports and 2 Fast Ethernet ports. 2.Power Budget and Switching Capacity: This POE switch supports POE (802.3af) and POE (802.3at) devices with a POE power budget of 60W and provides 1.2 Gbps switching capacity. 3.Compact Design: Featuring a compact fanless design, it is compact, lightweight, and has a rugged metal housing. 4.Uses: It can automatically detect and identify the power receiving equipment that meets the standard and supply power to it through the network cable. 5.Support Function: All ports support Auto MDI/MDI X function, support IEEE802.3X full duplex flow control and Backpressure half duplex flow control, and all ports have wire speed forwarding capability. specification:Item Type: 6 Port PoE Switch Material: Aluminum Alloy Plug : EU Plug 100-240V Basic Function: Compliant with IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Standards Compatible withIEEE 802.3at/af Compliant Powered Devices (PD) Compatible with Certified Non Standard Powered Devices (PD) Store and Forward For OS Automatic Learning and Aging IEEE802.3x Full Duplex Traffic Control and Backpressure Half Duplex Traffic Control Port: 4 x 100M POE, 2 x 1000M Cascading RJ45 Performance: Store and Forward: Support Exchange Capacity: 1.2G For OS Address Table: 2K Use Environment: Working Temperature: 0-40 Storage Temperature: -40-70 Working Humidity: 10%-90% RH Without Condensation Storage Humidity: 5%-90% RH Non Condensing POE Standard: Standard Ieee802.3af/at Single Port Maximum Power 30w, the Whole Machine Maximum Power 78W Support Overcurrent, Overvoltage, Short Circuit Full Protection Support High Power PD Soft Start Support Sequential Boot Support Certified Non Standard PD Power Receiving Input Power: AC input 220V 50/60HZ Supported Standards and Protocols: IEEE 802.3 Ethernet Media Access Control Protocol IEEE 802.3i 10BASE T Ethernet IEEE 802.3u 100BASE TX Fast Ethernet IEEE 802.3af Power over Ethernet Devices over Ethernet Data Pairs or Devices IEEE 802.3at Realizes High Power Supply of Ethernet Equipment Through Ethernet Data Line Pairs or Equipment IEEE 802.3x Traffic Control Default System Mode: Common Switch, Vlan Isolation, 250m Transmission Data Transfer Rate: Ethernet 10mbps Half Duplex, 20mbps Full Duplex Fast Ethernet 100mbps Half Duplex, 200mbps Full Duplex Internet Medium: 10Base T: 2 to 3 (cat3) or Above UTP,STP (100m) 10Base TX: 2 Pairs of Category 5 (cat5) or Above UTP,STP (100m) PackageList:1 x10PortPoESwitch 1x PowerCable 1 x User Manual