* * Made of high-quality materials * JR1810RX 6-12V children's electric vehicle control box ZCY1810RX receiver with 5-pin and 7-pin options * Connects the remote control and receiver * Remote control receiver controller for children's electric vehicles * Press and hold the forward and reverse buttons simultaneously; the indicator light flashes, then turn on the car. The indicator light stops flashing when connection is successful * Various styles available for better selection * First use or after battery replacement requires frequency pairing * Step 1: Install two AAA 1.5V batteries (observe correct polarity), then close the battery cover. The indicator light flashes three times to confirm proper installation * Step 2: Press and hold the frequency key (car selection) for about 2 seconds; the indicator light will begin to flash * Step 3: Turn on the car; the light turns off * Step 4: If frequency pairing fails (light does not turn off), power off and repeat steps 2 and 3 * Specifications: Type: Baby car accessory Color: As shown in the image Model (optional): Remote control, ZCY1810RX 5-pin, 5-pin Full set, ZCY1810RX 7-pin, 7-pin Full set * Package Included: Listing 1: 1 x remote control Listing 2: 1 x receiver Listing 3: 1 x remote control + 1 x receiver * Notes: 1. Actual color may vary slightly from images due to monitor brightness or lighting conditions 2. Slight manual measurement deviation may occur