Color: Random color, do not accept designation Material: Composite material Note: Smoke generator heating wire is 6V, blower voltage is 6V. It may be damaged if voltage exceeds 6V. A voltage reduction plate must be used if voltage exceeds 6V. Compatible with 6.0S and 6.1S (160A, with 160A marking on the shell) main boards. For 5.3, 6.0, and 6.1S main boards without the 160A marking, a voltage reduction plate must be used. Connect the heating wire to the voltage reduction plate (default output is 6V). Connect the heating wire and blower motor in parallel to the voltage reduction plate OUT +-. Connect the IN+- to the main board port for the smoke generator. Air blower current is approximately 0.3A; heating wire requires approximately 1.2A. Package Contents: 1 x Smoke Generator Note: Light reflection and differences in display screens may cause slight color variations between the image and the actual item. Measurement may vary by +/- 1-3 cm.