Dual system design: this 2-in-1 rework station combines the versatile use of a soldering station and a hot air rework station. Soldering iron station provides a dual digital LED display system and dual circuit breakers, including temperature display, hot air volume, C/F display mode, soldering iron sleep mode, etc.Temperature settingIntelligent temperature setting - with high-end precision PID program, the soldering station temperature is adjustable between 356~932F (180C-500C). The temperature of the hot air rework station is adjustable between 212~932F (100C-500C), the air volume is adjustable (max. 120L/min), and the heat gun has a stop/start function that starts when placed on the stand to extend the life of the heating element when not in use.Auto sleep function: this hot air soldering station is equipped with a heat gun and a soldering iron. With handle induction system, with high quality ABS plastic housing and double blue LED indicator. The heat gun has a stop/start function that starts when placed on the stand to extend the life of the heating element when not in use.Safety anti-static: safety anti-static can help prevent damage caused by static electricity or leaky parts. Unique fail-safe protection - This is an improved version of the exclusive safety design. If the heat gun stops abnormally during use, the program automatically sets an alarm and turns off the power to the heating element to ensure safety.Wide application: this product is designed for soldering or desoldering BGA, SMD, PCB, IC and other temperature sensitive components, an indispensable tool for mobile phone repair, laptop repair or soldering circuit boards. A real must for DIY enthusiasts and weekend professionals.Hot air gun:Operating voltage: AC220-240V or AC100-130V.Frequency: 50Hz/60Hz.Output power: 750 W.Temperature range: 100C ~ 480C.Temperature stability: 2C air.Volume: 120 L/min (maximum).Soldering iron:Operating voltage: AC220-240V or AC100-130V.Output power: 60 W.Frequency: 50Hz/60Hz.Temperature range: 180C - 500C.Temperature stability: 1 C.Soldering iron: ESD design.Heating element material: ceramic.How to use:1. Clean the electronic components to be soldered.2. After the soldering iron has reached a certain temperature (not too high, recommended 300-400 C).3. Apply a little solder to the heated soldering iron tip to prevent oxidation, then rub the tip so that the solder spreads evenly on the surface of the tip.4. Start soldering.Packaging list:(Optional )1 X 60 W Soldering Station1 X Manual*1OR1 X 60 W Soldering Station with Accessories (Optional )1 X Manual*1Note:1. Please allow 1-3cm (0.4-1.18") difference due to manual measurement and slight color variation for different display setting.2. Due to the light and screen difference, the item's color may be slightly different from the pictures. Please understand.