Item Type: Infrared Sauna BlanketMaterial: ABS. Oxford Cloth. PUWeight: Approx. 4400g / 155.2ozSize: Approx. 180 x 80 x 2cm / 70.8 x 31.5 x 0.8inStyle: Smart Zipper ReacherProduct Color: PinkMoxibustion Magnet Function: It is the effect of magnetic therapy produced by heat compress. It is a trace component, not in the epidermis, but the magnet powder is dispersed in the blanket.Product Power: 650WBlanket Temperature: 35 to 80Time Control: 1-60 MinutesThere is A Memory Function: As long as the time is set for the first time, the following time it is turned on by the remote control, it is the temperature and time set beforeRemote Control Battery (Shipped Without Battery): Button Battery x 1, CR2025 ModelPrinciple and Efficacy: The steaming blanket uses far infrared heat to generate heat, and through perspiration, it can achieve the effects of cooling, moisture, and acid.Applicable Places: Household, Beauty InstrumentSimple Troubleshooting:Turn On the Host, the Host Does Not Respond: you can check whether the power supply is properly connected, and check whether the power switch is turned onNo Output: You can check whether the accessories are properly connected to the main body, if the application time is too long, the shutdown will naturally coolCheck whether the power supply voltage is normal (professionals are required)The Whole Machine is Not Powered on: check whether the fuse is burned out, if it is burned out, please replace itI. Acid drainage blanket operation method: time setting 1-60 minutes, temperature according to individual body needs to adjust their own use! Do it 30 minutes after meals, take a hot bath before doing it to help open the pores, do it before, during and after drinking more warm water to promote metabolic function, dry your body with a dry towel after doing it without taking a bath, if you need to take a bath after 3 hours and then washII. Host controller instructions for use.1. Connect the black power plug to a standard power outlet.2. Connect the other end of the black power plug to the receiving port on the back of the host controller.3. Connect the two gray wires on the heating pad into the 1-2 receiving ports on the back of the host controller4. Press the power switch located on the back of the host controller to start the generator. (Note: The outside of the pad will get hot. Do not put anything on it.)5. Let the sauna talk about heating for 10 minutes6. Use the up and down arrows to adjust the time and temperature as needed. To switch from adjusting the time to the temperature, select the button with the tool icon7. "Output 1" controls the temperature of the front body (the mat on your body). "Output 2" controls the temperature of the back, you are lying on the back of the mat.8. To start or pause the heating sauna blanket, select the S/P button. When the two red lights come on, the mat will heat up and turn on.9. Use the remote control to turn the temperature up or down at any time.10. If at any time the generator begins to repeat the beep, this is an alarm and may not be set correctly.11. Specific host controller button function adjustment setting operation method refer to the paper manual, the paper manual has a identify and specific operation is more convenient to quickly understand.