6pcs 5pin 30A Automotive Fuse Relay Switch Harness Kit with Heavy Duty 14AWG Hot Description: Built in fuse socket with included 30A blade fuse with heavy duty 14AWG wires for main contact. Comes with color-coded wires for loads/accessories Wiring, high quality contact material, it has better resistance to erosion, also good conductivity Black-Ground (85), Red-VDC (30), White- (86), Blue-Output N/O (87), Green-Output N/C (87a) Unique male-female slot on each socket edge, easy to connect all relays together, Clean & Neat Install Wide Application-greatly used for car lights, fog lamps, wiper, starter, fans, speakers, traction control systems, etc. Specification: Type: 5-pin Relay Harness with fuse Model: JD2912 Material: Plastic Size:61 x 35 x 25.5mm/2.4 x 1.4 x 1 inch Total Length:125 mm/ 4.9 inch Specification: 5-pin Current: 30A Rated Voltage: DC 12V/DC 24V Pull-in Voltage: 8V DC Release Voltage: 1.2V DC Coil Power Consume: 1.8W Contact Pole Voltage Drop: 10A250mV Insulation: 100M (500V DC) Dielectric withstand : 500VAC/M Contact Pole Load: NO:30A/14VDC NC:20A/14VDC Working Temperature: -40 to 80C Electrical Durability: 100 thousand times, 1.5s NO / 1.5s OFF Mechanical Durability: 1 million, 300 times/min Housing Material: PA66 Nylon Load Pin Material: H65-Y2 Package Includes: 6 Pieces Relays Set 6 Pieces 30A Fuse Note: 1.Please allow 1~3 cm error due to manual measurement, thanks. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, thank you. _x000D_