Features: 1.The template is made of high-quality acrylic material, with good toughness, strong repairability and long service life. 2.There is a protective layer of kraft paper on the exterior of the template, which can effectively prevent friction and impact during use. 3.You can use this set of molds to make your own wallet, which is practical and fun, and is very suitable for people who like DIY crafts. 4.These templates are moderate in weight, and will form greater pressure when drawing lines and cutting the skin, and it is not easy to slip. 5.Each template has a serial number sign on it, and it is easy to install; Just cut the material and stitch it according to the instructions for use. specification:Item Type: Acrylic Template Main Material: Acrylic(the product is composed of complex materials) How to Use: 1. Glue A02 with large banknotes to the upper of A01 2. Cut A05, A06, A04 according to the marked X to cut the corresponding number of leather materials 3. Place two pieces of A05 on the upper of A04, and then place A06, sewing on both sides of A05 first, fix the bottom, and then stitch the inner side 4. A04 is glued to A03 5. Place A03 on A02 and A02 on A01 6. Overall stitching PackageList:7 x Acrylic Template Note1. Hard leather, such as vegetable soft leather, is recommended to be cut with an awl along the pattern line, or cut directly with a leather knife. 2. For some leather processed by special crafts, the cortex cannot be marked with an awl, so it needs to be cut with a silver refill pen.