7inch Capacitive Touch Display Development Board ESP32-S3-Touch-LCD-7 is a microcontroller development board that supports 2.4GHz WiFi and BLE 5 Integrated large-capacity Flash and PSRAM, with an onboard 7-inch capacitive touch screen, can smoothly run GUI interface programs such as LVGL; combined with a variety of peripheral interfaces, it can quickly develop HMI and other applications of ESP32-S3 Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, clocked at up to 240MHz, supports 2.4 GHz Wi-Fi (802.11 b/g) and Bluetooth 5 (LE), onboard antenna, built-in 512KB and 384KB ROM, stacked 8MB Flash and 8MB PSRAM Onboard 7-inch capacitive touch screen, 800x480 resolution, 65K color, supports I2C interface to control capacitive touch, 5-point touch, supports interrupts, onboard CAN, RS485, I2C interface and Micro-SD card holder, etc., integrated full-speed USB serial port Supports precise control such as flexible clock and individual module power settings to achieve multi-scenario low power consumption mode Name:Capacitive Touch Display Development Board Resolution:800*480 Size:7 Inch 5-Point Touch:Yes 2.4GHz Wi-Fi:Support Processor: Xtensa 32-bit LX7 Dual Core Processor Material: PCB+LCD colour: As shown Package Contents: 1 * 7Inch Touch Display Development Board 2 * HY2.0 2P to 2PIN male cable 10cm 1 * HY2.0 2P to 3PIN male cable 10cm 2 * HY2.0 2P to 4PIN male cable 10cm Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.