Rubber Band for Band Saws 8-14 Inch Suitable for Woodworking Features: The rubber band must be stretched. Upon receiving the product, soak it in hot water to ensure even expansion. Then, securely hang it on the wheel without using glue! To guarantee that the anti-slip rubber ring fits tightly against the outer edge of the wheel and prevents slippage during operation, the circumference of all anti-slip rubber rings must be smaller than that of the bandsaw wheel. Installation method: 1. Remove the original worn rubber ring. If there are any residues on the outer edge of the wheel, please clean them off first. 2. Soak the new anti-slip rubber ring in warm water for 3-5 minutes, then install it after it has softened. 3. Begin installation from one side of the wheel, pressing the end of the rubber ring firmly into the groove on the outer edge of the wheel. Use a flat-blade screwdriver to gently pry the rubber ring into the groove. Avoid applying too much force to prevent damaging the rubber ring. 4. If needed, add a few drops of glue along the grooves on the edge of the wheel to ensure a more secure fit. Specifications: Material: Rubber Color: Black Optional Size: 8 Inch, 9 Inch, 10 Inch, 12 Inch, 14 Inch 8 Inch: 8" x 1/2" x 0.12" (205 * 12.7 * 3mm)(Approx.) 9 Inch: 9" x 1/2" x 0.12" (230 * 12.7 * 3mm)(Approx.) 10 Inch: 10" x 1/2" x 0.12" (250 * 12.7 * 3mm)(Approx.) 12 Inch: 12" x 3/4" x 0.12" (317 * 20 * 3mm)(Approx.) 14 Inch: 14" x 1" x 0.12" (350 * 24.5 * 3mm)(Approx.) Suitable for: Woodworking Band Saw Quantity: 1Pc Package Included: 1 Band Saw Rubber Band When purchasing, please check the size and dimensions of the product to ensure it meets your requirements. We have provided extensive details regarding the product, including its features and specifications. We are committed to your satisfaction, so if you have any questions or concerns, please feel free to reach out to us. We are here to assist you. Thank you for choosing our product. We hope you enjoy it!