How to Replace a Band Saw Tire: 1. Unplug the band saw, loosen the saw blade tension, and remove the blade. Then remove the band saw wheel. 2. Once removed, completely remove or cut off the old tire and any residue left behind. 3. Slide part of the new tire onto the wheel rim, then insert a short rod or pipe between the tire and wheel. Roll the pipe around the rim to evenly seat the tire. 4. Apply a small amount of adhesive to a brush and spread it on both the tire and wheel surface. Roll and repeat around the entire rim. Allow the glue to dry for 24 hours before resuming use. 8-inch Diameter: Designed for 8-inch (205mm) band saw wheels. Compatible with HBS20 band saws using 1400mm and 1425mm blades. Color: Black Material: Rubber Size: Approximately 12.7mm wide x 3mm thick Package Contents: 2 x Band Saw Rubber Tires Note: The package includes only the items listed above. Other products are not included. Lighting and monitor settings may cause slight color variations between the image and the actual item. Measurement may vary by +/- 1-3cm.