Condition: 100% Brand New_x000D_Item Type: Luminosity Sensor Module_x000D_Material: PCB_x000D_Purpose: To convert luminosity into digital signal output_x000D_Operating Voltage: 3V~5V DC_x000D_Operating Current: 120uA-190uA (Maximum)_x000D_Detection Range: 0.1-40000+ Lx_x000D_Maximum Wavelength: 560nm_x000D_Interface Type: I2C_x000D_Output Mode: 16-bit digital output, with SMBUS (TSL2560) 100 kHz or I2C_x000D_Temperature Range: -30~80 1TSL2561 luminosity contains two photodiodes, one which can detect visible light and infrared (IR), and the second which can detect IR light. 2With the sensor containing both infrared and full spectrum diodes gives the ability to separately measure infrared, full?spectrum or human?visible light. 3Upper and lower thresholds of permitted luminosity can be programmed to give an interrupt signal when the actual illumination exceeds this threshold. 4Digital output conforms to the standard SMBUS (TSL2560) and I2C(TSL2561) bus protocols. 5Programmable control of analog gain and digital output time. Automatic suppression of 50 Hz/60 Hz light fluctuations. 1 x Sensor Module 1 x Pin Header