説明
Features: _x000D_
_x000D_
Moistureproof, preservation and antibacterial, can seal all kinds of plastic bags. _x000D_
Compact size and light weight, easy to carry and use. _x000D_
Heating up quickly, almost no preheating time. _x000D_
Food and non-food applications, for both commercial and home use. _x000D_
Seal a wide range of bags and films with a maximum seal width of 20cm. _x000D_
8-grades adjustable thermal temperature control. _x000D_
Automatic power-off protection, the machine is plugged into the power supply, the default power-off state, when the operation is used, the sealing machine is powered on and heated to complete the sealing. _x000D_
_x000D_
Specification:_x000D_
Model: PFS_x000D_
Voltage: EU Plug 220V, 50HZ_x000D_
Material: iron +ABS plastic_x000D_
Maximum sealing length: Approx. 20cm/7.9in_x000D_
Heating gear: 8_x000D_
Pulse power: 300W_x000D_
Maximum sealing thickness: Approx. 0.3mm/0.01in_x000D_
Maximum sealing width: Approx. 2mm/0.08in_x000D_
Heating time: 0.2-1.5s_x000D_
Size: as pictures shown_x000D_
Weight: approx. 1774g / 62.6oz_x000D_
_x000D_
Users Manual:_x000D_
Simply connect the power cord to the outlet and adjust the heating time based on the seal thickness of the material._x000D_
Place the plastic bag on top, then press the handle, the LED indicator lights up and the machine will control the heating time itself._x000D_
When the LED is off, the power is automatically disconnected. After 1-2 seconds, the handle is removed and the seal is completed._x000D_
The Led indicator lights up only when the machine is sealed, and it does not illuminate if you just connect it to the outlet._x000D_
If damage occurs during sealing, it is because the heating time is too long, then shorten the heating time by turning the timer knob counterclockwise._x000D_
If an unsafe seal occurs, it is because the heating time is too short, then extend the heating time by turning the timer knob clockwise_x000D_
If the plastic bag is sticky to the machine, it is because the cooling time is not long enough. Please extend the cooling time after the LED is turned off and keep it for a long time to release the handle._x000D_
If the heating time is adjusted, do not make any changes during sealing or continuous sealing._x000D_
You can connect the power cord to the outlet at any time, as it will not consume any power if it is not sealed._x000D_
_x000D_
Package List:_x000D_
1 x Pulse Sealing Machine_x000D_
1 x Heat-resistant Strip_x000D_
1 x Heating Wire_x000D_
_x000D_
_x000D_
_x000D_
Note:_x000D_
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
-
Fruugo ID:
314453937-701044291
-
EAN:
8885109456918