Item Type: 8K Displayport 1.4 2 Way SwitchMaterial: Aluminium AlloyColour: BlackDP Resolution: 8K at 30Hz, 4K at 120Hz, 1080P at 240HzInput Output TMDS Signal: 0.5-1.5 Volts P P (TTL)Input Output DDC Signal: 5 Volts P P(TTL)Scope of Application: Distributors for Multi Sources and DisplaysPackage List1 x 8K Displayport 1.4 2 Way Switch1 x Data Cable1 x Manual1. When the display flashes, please check whether the total length of the connection is too long, or when switching, The resolutions of the two monitors are different. Please make sure the resolutions of the two monitors are the same before switching.2. Not equipped with DP cable. (Please be sure to use a standard DP 1.4 cable, you need to connect a standard DP 1.4 cable that supports 8K to enjoy the visual effect, and both output and input terminals support 8K display, DP1.4 input plus output cable length is less than 3 meters/9.8ft).1Displayport Splitter: Supports 8K at 30Hz, 4K at 120Hz, 1080P at 240Hz resolution, provides you with a transfer rate up to 32.4Gbps, and is backward compatible with all previous DP standards. (You need to connect a standard DP 1.4 cable to enjoy the visuals.) 2Bidirectional DP Switcher: This DisplayPort switcher allows you to connect two DP sources to one DP monitor or connect one DisplayPort source to switch between two monitors. Support for Windows, for Unix, for Linux, for OS X computer systems. 3Plug and Play: Requires an external power supply, the DP selector box is easy to set up and operate. Note: When in use, press the "Select" key to switch the signal between two signal sources or display, and the indicator light shows the working status. 4Strong Compatibility: Suitable for most DP port devices, such as laptops, monitors, projectors, computers, TVs, for PS4, TV boxes, game consoles, etc. Widely used in home entertainment, information command centers, conference rooms, schools and other training places. 5Important: (Can not display two monitors at the same time) When connecting multiple sources or monitors, you must use a USB cable to power the splitter. If you don't power the splitter, your source or monitor won't be able to display anything. This is a manual switch, not an automatic switch.