How to Replace a Band Saw Tire: 1. Unplug the saw, loosen the saw blade tension, and remove the blade. Then remove the saw wheel. 2. Once removed, completely remove or cut the old tire and any residue left behind. 3. Slide part of the new tire onto the wheel rim, then insert a short rod or pipe between the tire and wheel. Roll the pipe around the rim to evenly stretch and seat the tire. 4. Apply a small amount of adhesive to a brush and spread it evenly on both the tire and wheel surface. Roll and repeat around the entire rim. Allow the glue to dry for 24 hours before using the saw. 9-inch Diameter: Designed for 9-inch (230mm) band saw wheels. Compatible with Delta 28-150 BS100, Grizzly band saws using 1570mm and 1575mm blades. Color: Black Material: Rubber Size: Approximately 12.5mm wide x 3mm thick Package Contents: 2 x Band Saw Rubber Tires Note: The package includes only the items listed above. Other products are not included. Due to lighting and display differences, the color in the image may vary slightly from the actual item. Measurement may vary by +/- 1-3cm.