9 standard SATA3.0 interfaces Can connect 9 SATA3.0 ports at same time, support hot swap Support Native Queuing (NCQ) SATA controller supporting AHCI Does not support hardware , supports soft provided by and other NAS systems model:PCE9SAT-R01 interface:PCI-E TO 9SATA3.0 6Gbps Input interface:PCI-E 4X 3.0 (compatible with 4X8X16X) signal is actually 2X Interface rate:SATA3.0 6Gbps Installation location:PCI-E slot, not compatible with PCI and PCI-E 1X Function introduction:Convert motherboard PCIE signal to 9 SATAO Support system:forWIN10/11/2003/LINUX Things to note:Does not support SAS hard disk, only supports SATA disk (The product printed words depending on batch, but this does not affect use) Color: As Shown Material: PCB Package Contents: 1 x PCIE to SATA Card Only above package content, other products are not included. Note: Light reflection and different displays may cause color of item in picture a little different from real thing. The measurement allowed error is +/- 1-3cm.