Material: Aluminum Alloy<br> Compatibility: for Sony A7 IV/ZV-E1/A6700/A7C II/A7S III/ZV-E10/ZV1/A7C/FX3/FX30, for Canon R5/R6/R7/R8/R10/RP/70D/90D/R50, for Fujifilm<br> X-S10/X-T4/X-H2S etc..<br> before purchase!<br> Input Voltage: Type C, 5V/2A Input<br> color: Black<br> Installation Method: Buckle Installation<br> Digital Display Regulation: High-definition LED Display<br> Gear Adjustment: 19 Gears(12-30℃ Adjustment). Large area cooling, cooling area up to 99%.<br> Color: Black<br> SNR:≤ 30db<br> Power Cable: 2 Meters Long USB Type A to Type C Power Cable. Supports charing and using at the same time.<br> Built-in Battery Specification: built-in 3200mAh high-capacity 18650 lithium battery, maximum power output up to 120 minutes.<br> Working Principle:<br> 1. Power on and run 60S, the display temperature is the real-time temperature,<br> 2. Long press the power button can be switched on and off in working condition,<br> 3. The temperature control mode is automatic switching after power on one minute later.<br> Experience Data:<br> Laboratory ambient temperature of 32 ℃, the cooling surface is not mounted on any object, the product cooling can be maintained at 22 ℃, Sony A7C camera in the case of 4K recording video for 30 minutes, the product to maintain the temperature of about 26 ℃. This data is derived from laboratory tests, test results may vary in different environments, please refer to the actual prevail.<br> Package Contents:<br> 1 x Camera radiator<br> 8 x Radiator clips<br> 1 x Data cable<br> Only the above package content, other products are not included.<br> Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.