Feature: 1. ABZ encoder is small in size, light in weight, compact in structure and easy to install 2. Come with higher protection, using good quality material, more robust and durable 3. Incremental encoder have stronger anti‑interference, no pulse fuzziness problem 4. Used for using in accurate working environment, office automation and engineering fields 5. Mechanical speed is 6000rpm, current consumption is 30mA, possess high efficiency and energy saving Specification: Item Type: ABZ Encoder Material: Aluminum + plastic Model: C38S6G5 Current Consumption: 30mA Mechanical Speed: 6000rpm Shaft Diameter Size: Approx. 6mm / 0.2in Number of Phases: ABZ 3 phase. Package List: 1 x Encoder3 x Screw Pieces Note: 1. This product is composed of accurate components, so please be careful not to drop it2. When installing, if the eccentricity or deviation angle is too large, it will shorten its service life3. Do not use in strong impact, vibration, corrosive, large magnetic field, high temperature, high humidity and acid‑base environment4. An error in the number of pulses may be caused when the power is turned on or off. After the power is turned on, there is a 0.5S delay time for use5. After the product is fixed, do not pull the cable with a force exceeding 29.4N6. When there is a high‑voltage line or power line nearby, please use a conduit to cover the cable7. When wiring, pay attention not to short‑circuit the terminals, and make sure that the wiring is correct. Wrong wiring will damage the internal circuit. It is recommended to insulate the unconnected terminals.8. Shielded wire should be grounded9. Do not disassemble the product by yourself