Description The Power Supply is Standard 12V 3A Control electric locks or bolts directly. It not only lessens the load of access controller save project wires, but provide very stable and reliable output in a various applications. It is widely applied in access control system and related applications such as electric magnetic lock, lock controller, RFID-IC reader, password keypad, etc. Features - Material: Metal. - Worldwide voltage input AC 110 - 240V. - Set NC/NO outputs, can control various types of electric locks. - Compact design and light weight. - Based delay control circuit, lock time can be in 0-15 seconds. - Note: Opening time must set to 0 second when connecting with electric controlled lock. Otherwise electric bolt lock would be burned down. - Compatible with E/M lock, access controller, exit push button and RFID reader. - Can reduce the load of access controller, save wiring to reduce the hidden trouble. - Set NC/NO outputs, can control various types of electric locks. - Based relay control circuit, lock time can be adjusted with 0 -15 seconds. - Automatic protection function for dangerous situation: overload / over voltage / short circuit. - Protection mechanism: power may be temporarily disconnected or the fuse auto insured. - Operative device: E/M Lock, access controller, exit push Button. - Compact design and light weight. - Worldwide voltage input AC 110 - 240V. Specification - Input Voltage: AC 110-240V (Worldwide voltage). - Input Frequency: 50-60Hz. - Output Voltage: DC 12V/3A. - Power: 36W. - Load: 1% Typical. - Output Stability: 0.5% Typical. - Hold Time: Full Load Typically 20ms. - Operating Temperature: -20C~65C. - Adjustable Locking Delay: 0~15sec. - Dimensions: 115 x 92 x 12mm(L * W * H).Package List1 x Power Supply 1 x User manual