Name: Electronic drain valveModel: 507292Indicator lamp: LED indicating power on / offVoltage range: +/10%Protection : IP65Insulation: HMaximum working pressure: 1.6MpaMaximum temperature: 90 Celsiustemperature: 40 Celsius to 60 CelsiusThe largest current consumption: 4mAPower supply voltage: 24240V AC/DC 50/60HzDischarge time (ON): 0.510 secondsTime interval (OFF): 0.545 minutesWidely used in , separators, dryers, gas tank, drip legs and other compressed air system componentsClean the compressed air system installation.Note the direction of the when installing the valve: outlet do not use the hose not against the impact of air.Power supply voltage should be with the drain valve voltage: the must be connected to connector "1" when using DC.When leave the the drain valve has connected to the cable, brownness is fiery L,blue is the N,yellowgreen color is the safety ground wire GND.Be to tighten the long screw on the terminal box to prevent water from burning.WarningWhen installing the electronic drain valve, make :Compressed air has been emptied ( is, under pressure).The power supply has been switched off.colour: Gold + blackMaterial: metalsize: : 5 mmIn / out port size: 1/2inchPackage Contents: 1 x Electronic drain valveOnly the above package content, other are not included.Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/ 13cm.