AM5 CPU Support Frame for AMD Processors - Anti-Bending Computer Component

1. This product features four-sided flat pressure design instead of multi-point pressure for precise CPU positioning and secure fixation. 2. The base makes full contact with the motherboard using a flat-bottom design and includes standard insulation protection pads to minimize motherboard stress and reduce signal interference. 3. The aluminum alloy side is elevated to help reduce signal interference on the motherboard. 4. The housing is crafted from CNC-machined, anodized aluminum alloy with sandblasted finish. Installation Instructions: 1. Place the motherboard horizontally on a flat surface and open the CPU socket retention mechanism. 2. Use the included screwdriver to remove the upper mounting bracket and install the lower fastener. 3. Carefully place the CPU into the socket. 4. Align and secure the improved retention bracket over the CPU; gently slide it until it clicks into position. 5. Tighten the mounting screws diagonally in alternating half-turn increments to ensure even pressure distribution across the CPU. Color: Red Material: Aluminum Alloy Package Contents: 1 x L-shaped screwdriver 1 x TF71G mounting bracket 1 x Base plate Note: Color appearance may vary slightly due to lighting conditions and screen settings. Measurement tolerance: ±1–3 cm.