SPATTER RELEASE is the traditional anti-spatter formulation - which has been developed specifically to exclude the use of any silicons or flammable solvents.APPLICATIONSSpatter Release is non-flammable and economical in use. Ideal for numerous industries: Automotive Manufacture and Repair Office Furniture Heavy Plant Manufacture Agriculture Shipbuilding and Dockyards Tool Manufacturers Construction Fork Lift Trucks Prevents spatter adhesion on: Welding equipment Work-pieces Surfaces Jigs and Surrounding areas Apply a light even film from 9 - 12 inches (25 - 30 cm). Do not over-apply.After welding - the film can be wiped away very easily and leaves no residues. Post-welding applications (e.g. painting) can then be carried out without interference Appearance : Clear - colourless liquid Odour : Strongly ethereal SG @ 25C : 1.3 Pressure @ 25C : 7 - 8 Bar Discharge rate : 2.3 g/sec Solubility : Soluble in solvents - insoluble in water Flammability : Non-flammable Flashpoint : Not applicable in sealed aerosol STORAGEThe product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame.