Multi-function smart multimeter: can measure AC/DC current, AC/DC voltage, resistance, capacitance, temperature, frequency, continuity and diode test, fire wire detection, etc. Dual Flashlight Design: Two flashlights on the top for additional illumination of the working area in dimly lit or dark environments, they are not afraid of the dark when working and will automatically turn off after about 5 minutes. Non-contact NCV voltage detection: put the NCV sensor closer to the cable to be measured, and the multimeter can detect whether the voltage is greater than 90V AC voltage. When AC voltage is detected, the buzzer of the meter triggers an alarm, and the LCD analog bar displays the induction intensity. Operation safety: built-in overload protection fuse, intelligent anti-scalding protection. They meet the DC/AC 600 V CAT III overvoltage standard and double insulation protection (class II). Large LCD screen and easy to operate: soft buttons are easy to operate, large LCD display with bright backlight, convenient to quickly check the measured data, even in a dark environment. Compact and Accurate: As small as a mobile phone, convenient to use and carry around. Built-in with high performance chip to ensure its accuracy. Silicone Protective Case: Protected by a soft silicone cover, you can use the meter in a variety of environments without worrying about it falling or being scratched by hardware. Specifications: AC voltage: 600mV-999.9V DC voltage: 600mV-999.9V AC: 20mA 10A DC: 20mA 10A Resistance: 0Ω 99.99MΩ Capacitance: 0nF 99.99mF Hz: 0 1000 Hz Temperature: -40 1000 (-40 1832) LED: Yes Buzzer: Yes Induction NCV: Yes Data Hold: Yes Neutral/Fire Wire: Yes Color Orange Material: ABS Display: LCD Max. Display: 9999 digits Range: Automatic range Sampling time: approx. 3 times/second Auto power off: 15 minutes Working height: max.